When we received this armoire for our dining room, it looked very “brand new.” Not that “new” is bad, but I prefer the old and weathered wood look that compliments our farmhouse style. Therefore, I decided to distress it using sandpaper, stain, and chalk paint. (FYI – this is pine wood but these techniques work with most types of wood.)
- US Art Supply Foam Brushes
- US Art Supply 24 Pack of 2 inch Paint and Chip Paint Brushes for Paint, Stains, Varnishes, Glues, and Gesso
- White Chalk Paint
- Minwax 70014444 Wood Finish Penetrating Stain, quart, Jacobean
- Varathane 307415 Premium Fast Dry Wood Stain, 1/2 Pint, Briarsmoke
- DEWALT DWE6421K Random Orbit Sander Kit, 5″
- Mestool 58-AP 100 per box include 60 80 120 150 and 220 GRITS
- KES White Ceramic Cabinet Knobs Pulls (10 Pack) Vintage Dresser Drawer Furniture Hardware with Black Backplate, HCK803-WH-P10
These are affiliate links. This means that if you click on the link and purchase the product for your own project, I earn a small percentage of the sale. Using the link does not, in any way, cost you anything (no mark-up, etc). It simply helps me to pay for this website and continue providing free how-to articles. I want to stress that I ONLY include links for products I have actually used and recommend.
- Using palm sander and 60 grit sandpaper, sand wood until mostly bare. (I love the sander listed above because I was able to do this inside without creating a mess! I was shocked at how efficient it was containing the dust.)
- Whitewash Wood: Mix 1 part water to 2 parts white chalk paint (see in materials list above). Apply on wood with brush and lightly wipe off with rag. I did varying degrees of intensity, meaning some areas looked painted completely white and others were just lightly coated. After drying, sand the more intense areas with palm sander and 80 grit paper to achieve a chipped paint look.
- Briarsmoke Stain: Using foam brush, apply the briarsmoke stain almost completely over all wood, leaving a few streaks of white. (Do this in sections, wiping off with rags as you go to prevent stain from drying and becoming tacky.)
- Jacobean Stain: After briarsmoke is applied, use a foam brush to apply jacobean stain in select areas. Employ the same method of brushing on and wiping off with rag. The dark areas (almost black) on the armoire is from this stain.
- If the wood looks too “patchy,” either sand the area to smooth or apply one of the above-mentioned techniques again. It is really about layering until you achieve the look you are going for. I did not apply a topcoat to the armoire because I was going for the dull/unfinished look and it will not be exposed to the elements. However, you may apply one as a final touch if desired.